Açıklama

– for 9 x 12 insertion tools
Measuring ranges: 1-10 N-m / 0.7-7.5 ft-lb / 9-90 in-lb
b: 28mm
h: 23 mm
L: 226 mm
LF: 188 mm
SF: 17.5 mm
Weight: 370 g

– 4 measuring modes (torque, angle, torque backed up by angle, angle backed up by torque)
– high-resolution graphic display + signal lamps
– Freely configurable menu structure
– 3 function modes: cut-out, peak hold (indicating mode with peak value) and track (indicating mode with current value)
– Micro-USB interface
– QuickRelease locking mechanism
– Data storage (≤ 2500 tightening jobs)
– as many as 200 joints can be programmed in up to 25 preset sequences
– overload protection by means of acoustic and visual signals and a fail-safe system (clockwise)
– autom. notification of the next calibration date, either by the number of joints or the time interval
– tightening torque is autom. corrected if a deviating extension is entered
– immediately reusable after release
– clockwise/anticlockwise tightening – it may be necessary to refit the insert tool rotated through 180° for anticlockwise tightening in the cut-out mode
– tactile and acoustic trigger signal
– torque and angle are simultaneously visible
– all readings are independent of the point of application of force
– Ergonomic handle, resistant to oils, fuels and Skydrol)
– 3 certificates (torque indication/triggering, angle of rotation)
– Supplied with software SENSOMASTER 4, USB cable, 4 micro batteries AAA/LR03, 1.5 V. Micro NiMH batteries AAA, 1.2 V, can be used
– display deviation value, torque ±2%, ±1 digit
– Display deviation Angle of rotation ± 1 %, ± 1 digit
– Display resolution Torque ≤ 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-m
– Display deviation Torque ± 2 %, ± 1 digit